Dimlux Humidity Sensor
WHY CHOOSE THE DIMLUX HUMIDITY SENSOR?
- Fine control over Grow room humidity.
- Allows humidifiers to be controlled via the Maxi Controller.
- Regulates and allows fine control over humidity.
- Lengthy 10m cable.
- Easy to use – plug in and programme via Maxi Controller
If you are suffering from humidity problems, then this is your solution. By plugging in this super accurate humidity sensor, the Maxi Controller will display an accurate relative humidity, and then be able to control humidification equipment accordingly, based on the parameters you set it to. It really couldn’t be much easier to use! The Dimlux Maxi Controller truly is an amazing piece of work when it comes to being able to control hydroponic grow room environments, with these sensors playing a crucial role in its functionality.
Dimlux and Airsupplies manufacturer and supply some of the finest grow room equipment you can buy. From lights to water-cooled environmental control, the level of technology involved in these products truly is second to none. Every individual component is designed to the highest quality, purpose-design for a hydroponic grow room. As humidity sensors go these are one of the most accurate on the market.
WHAT THE DIMLUX HUMIDITY SENSOR IS
The Dimlux humidity sensor is a small probe add-on that connects to the Dimlux Maxi Controller to monitor your Relative Humidity (RH). The sensor then reads the level of water vapour in the air and then send the readings to the Maxi Controller. It comes with a 5m cable, so is long enough to place almost anywhere required in your grow room. The readings it takes are sent to the Maxi Controller, which then turns on/off your humidifiers. Simple yet effective, it is a fantastic solution to combating problems associated with humidity.
HOW THE DIMLUX HUMIDITY SENSOR WORKS
It really couldn’t be much easier to use. Simply plug the sensor in to the Maxi Controller and find a suitable spot in your grow room to put the probe. It needs to be in a fairly central place in the room, somewhere that will give you a good average representation of the overall conditions as a whole. You then simply program your Maxi Controller to operate your humidifiers at certain set points: to come on when it gets too low or turn off when it is getting too high. The Maxi Controller then constantly works together with the sensor, responding as needed to make sure everything keeps as close to the pre-sets as possible.
TIPS ON USING THE DIMLUX HUMIDITY SENSOR
Correct placement is key to success! Make sure it is not tucked away in a corner where there is no air movement. Place it somewhere that gives you a good representation of your whole room.