Irrigation Pipe & Fittings

Help keep your nutrient solution cool with Iceline. This double layered irrigation pipe features a black inner to prevent light penetrating and a white outer layer to reflect heat. Switching your irrigation pipe to Iceline will drop your water temperature by 3-8 degrees Celcius!...

Flexible pipe for your irrigation systems. It's strong and durable yet pliable, enabling ease of installation and long term toughness.

Spare manifolds for use on the Origin systems to split the main 13mm pipe into the 3mm delivery tube used for drippers. Also great for making DIY dripper systems with.

Barbed Tee Pieces enable you to split the water into two directions. They are available in four, thirteen and nineteen millimeters.

Drippers are used to distribute nutrient solution to your growing media.  Wilma System Drippers :  Flood Dripper (Blue) - Fast flowing dripper suitable for growing in clay pebbles. Connects to 3mm irrigation pipe. Arrow Dripper (Black) - Slow flowing dripper for absorbent growing media such...

Inline valves allow you to restrict or shut off water supply to parts of your irrigation system. Available in four, thirteen and nineteen millimeters.

Barbed end plugs are used to terminate the irrigation supply, they are available in four, thirteen and nineteen millimeters.

Barbed elbows allow you to create a ninety degree bend in your irrigation system, without having to bend pipe work. They are available in four, thirteen and nineteen millimeters.

All of our high quality fittings are made to suit UK conditions. Simply plug together to make the system to suit your needs.

Barbed joiners will connect two pieces of pipe work together to suit your needs, they can be used to replace part of a damaged pipe. Available in four, thirteen and nineteen millimeters.

Inline filters prevent build ups and blockages, as they have an eighty mesh screen, (170 microns). This makes certain your nutrient solution is filtered, removing anything unwanted. They need to be removed and cleaned to ensure perfomance, this is recommended once a week. Available in thirteen and nineteen millimeters.

This simple to use fitting allows for and easy and leak-free connection to the tap on your water butt to the rest of your system. The built in filter ensures no unwanted debris enters your pipework which could potentially cause blockages.

Top hat grommets are used to connect pipe work to your tank or through any hard surface. Available in four, thirteen and nineteen millimeters.

19mm/13mm barb reducer joiner, allows you to use 19mm and 13mm piping in conjunction with each other.

Barb Cross connecter enables you to split the flow of water into three directions.

Primarily used in the latest versions of the AutoPot Systems where the AQUAvalve5 is used but can also be used for DIY systems. The connector has 2x 13mm barb connections and 2x 8mm barb connections. Also sometimes referred to as 16mm - 9mm Cross...

Ratchet Clamps are used to connect pipe work to a fitting, ensuring a tight seal and are very easy to apply. They are available in thirteen and nineteen millimeters.

These high quality moulded micro sprinklers deliver 60 litres per hour. Mounted upside down for overhead use they will provide a constant delivery to plant roots. Threaded end enables sprinklers to be screwed tightly into irrigation dripper line for a secure fixing and leak proof...

Ratchet clamps help to tidy pipe work, so your irrigation system stays clean and neat. Preventing loose pipe work which can be a possible trip hazard. Available in four, thirteen and nineteen millimeters.

A Hole punch is essential when installing nipples or any other addition to an irrigation system.