Growing Systems

All of our high quality fittings are made to suit UK conditions. Simply plug together to make the system to suit your needs.

Barbed joiners will connect two pieces of pipe work together to suit your needs, they can be used to replace part of a damaged pipe. Available in four, thirteen and nineteen millimeters.

The next generation ALIEN® RDWC systems have many new features and are available in either the “Black Series” or “PRO Silver Series” The fittings are now threaded and secured with rubber washers and nuts making system installation and relocation easier. Heavy duty clips situated...

Top trays, tanks and top plates (correx) used on the Gro-Tank NFT Systems. Top Tray Dimensions GT205 - 54cm x 34cm GT424 - 92cm x 43cm GT604 - 132cm x 43cm GT901 - 190cm x 43cm GT100 - 106cm x 106cm Tank Sizes GT205 - 20 Litres...

Various parts and fittings used on the IWS Standard and Pro Flood & Drain Systems. Standard Fittings Tee Elbow Straight Sealing Gland Pro Fittings (all come with fitting, 2x washers and nut) Tee Elbow Straight Pots Brain Pot: Comes complete with remote timer Aqua...

A range of components and spares for all of the AutoPot systems we sell. Here you can purchase trays & lids (without AQUAvalve), pots and root control discs for 1Pot, 1Pot XL, 1Pot XXL and easy2grow systems. If you are looking to extend your...

Inline filters prevent build ups and blockages, as they have an eighty mesh screen, (170 microns). This makes certain your nutrient solution is filtered, removing anything unwanted. They need to be removed and cleaned to ensure perfomance, this is recommended once a week. Available in thirteen and nineteen millimeters.

Top hat grommets are used to connect pipe work to your tank or through any hard surface. Available in four, thirteen and nineteen millimeters.

This simple to use fitting allows for and easy and leak-free connection to the tap on your water butt to the rest of your system. The built in filter ensures no unwanted debris enters your pipework which could potentially cause blockages.

19mm/13mm barb reducer joiner, allows you to use 19mm and 13mm piping in conjunction with each other.

Barb Cross connecter enables you to split the flow of water into three directions.

The AQUAvalve5 is used in all AutoPot Systems and controls the flow of water to your plants by simple gravity pressure from a water butt or tank. No pumps, mains water pressure, electricity or timers are required. Once installed and connected to the tank the AQUAvalve will open and...

Specifically designed for the needs of the soil/coco grower in mind, the EasyFeed System allows you to automatically water any number of plants without the need for pumps or even electricity! The system benefits from larger 16mm pipe used throughout so there is no...

Primarily used in the latest versions of the AutoPot Systems where the AQUAvalve5 is used but can also be used for DIY systems. The connector has 2x 13mm barb connections and 2x 8mm barb connections. Also sometimes referred to as 16mm - 9mm Cross...

The AutoPot is the ultimate self-watering pot system, suitable for both hobby and commercial scale growers. These modular systems are infinitely extendable and completely customisable in terms of layout. They are suitable for use with a wide variety of growing medium and require no electrical power in order...

Ratchet Clamps are used to connect pipe work to a fitting, ensuring a tight seal and are very easy to apply. They are available in thirteen and nineteen millimeters.

The ET Series Air Pumps are the perfect choice for those that require large amounts of air infusion. Their high pressure rating allow them to be placed far away from the tank without any drop in output and with flow rates up to 150L...

Alien RDWC systems incorporate 20L or 36L buckets and are one of the best systems to grow in hydroponically. They optimise maximum growth potential, due to the super oxygenated nutrient solution, being constantly recirculated around the system, by an inline pump. Using this system, enables the grower to obtain the largest...

The ultimate out-the-box solution for living soil growers who want to take growth to the next level! By increasing the volume of soil on this scale enables multiple plants to be housed in a single bed whilst still having more growing media, resulting in...

Multi-Ducts are high-yielding complete hydroponic growing systems which enable growers to manage a large number of plants from one low-lying integrated reservoir - dramatically up-scaling the number of plants and yield, without increasing workload. Each Multi-Duct has long planting channels above its low-lying reservoir. Plants...